Tagged: Languages Tutor
- This topic has 19 replies, 12 voices, and was last updated 2 years, 12 months ago by Evilpilli.
-
AuthorPosts
-
March 12, 2018 at 11:19 pm #85244March 16, 2018 at 4:22 am #123703Nyama74Member
Love this pedal…thanks for listening, EHX!
March 16, 2018 at 8:16 pm #123712LoopyGuitarMemberLove this pedal! I was working with version 28 and its ocassional lockups.
Just today, received notification of update 36. Installed it. Everything was OK, but after a while, with a couple of ill-placed switch presses, version 36 got into a state in which only Loop A can be recorded.
I’ll reinstall version 36, but I think that there may be a problem lurking there somewhere.
Has anybody seen this?
March 17, 2018 at 5:19 pm #123718EHX STAFFKeymasterNo But we will be watching!
March 17, 2018 at 9:16 pm #123719danibalParticipantI would love this pedal to have an Instant Undo function. Do you think this will happen someday?
March 29, 2018 at 2:10 pm #123753Flick (EHX Staff)ModeratorQuote:I would love this pedal to have an Instant Undo function. Do you think this will happen someday?No, the 22500 is not going to have an instant undo. Sorry about that.
March 29, 2018 at 2:11 pm #123754Flick (EHX Staff)ModeratorQuote:Love this pedal! I was working with version 28 and its ocassional lockups.Just today, received notification of update 36. Installed it. Everything was OK, but after a while, with a couple of ill-placed switch presses, version 36 got into a state in which only Loop A can be recorded.
I’ll reinstall version 36, but I think that there may be a problem lurking there somewhere.
Has anybody seen this?
Has this problem continued to occur on your 22500? It might be a good idea to try re-formatting the SD card if it does continue.
April 27, 2018 at 6:54 pm #123848pibrocherMemberI am having trouble with this 36 update. I was able to do the previous patches just fine but this one is problematic. I get stuck on the last step where the 8 Mode LEDs are all Solid (as well as the 4 reverse/octave lights) but when I press and hold the MODE knob for the last step the lights never change and the little “u” never shows up. It just sits there. Anyone else seen this?
April 30, 2018 at 6:45 pm #123862Flick (EHX Staff)ModeratorQuote:I am having trouble with this 36 update. I was able to do the previous patches just fine but this one is problematic. I get stuck on the last step where the 8 Mode LEDs are all Solid (as well as the 4 reverse/octave lights) but when I press and hold the MODE knob for the last step the lights never change and the little “u” never shows up. It just sits there. Anyone else seen this?Do you see the software version number in the display before you hold the MODE knob to update?
June 8, 2018 at 1:00 am #123968pibrocherMemberI tried a fresh format downloaded a new copy of the patch and 36 is working now, must have been bad media. thanks for help
October 3, 2018 at 2:09 am #124365philhartMemberIs there a way to start both loops and rhythm section all together?
October 3, 2018 at 1:57 pm #124366Flick (EHX Staff)ModeratorQuote:Is there a way to start both loops and rhythm section all together?The only way to do this is to press all three footswitches simultaneously.
October 4, 2018 at 12:54 am #124369philhartMemberYou can stop them all simultaneously, for my application sometimes it would be nice to be able to to start them all simultaneously.
Any chance that might happen in a future firmware update?
Thanks for your help.
October 4, 2018 at 1:20 pm #124370Flick (EHX Staff)ModeratorQuote:You can stop them all simultaneously, for my application sometimes it would be nice to be able to to start them all simultaneously.Any chance that might happen in a future firmware update?
Thanks for your help.
Possibly maybe if we can figure a good way of doing it that makes sense for the user and doesn’t impede the way the footswitches currently work. We’re definitely open to ideas!
October 14, 2020 at 5:27 pm #126532verobassista@gmail.comMemberHello everyone! Long shot but i wanted to ask the following:
Just recently got a 22500 and it’s the most compact dual stereo looper i’ve seen by far! Would be the perfect machine but it’s missing the rec straight into overdub option, quite crucial to layer loops quickly!
also despite the 2018 firmware adding the option to clear the loops by pressing stop AND loop 1 or 2, a double press+hold of loop 1 or 2 would be ideal for erasing loops (it still takes both feet to erase loop 1!).
Is any of this a possibility for a future firmware update? Or has any other update come out after march 2018 that i’m not aware of?
Thanks!
Alex
-
AuthorPosts
- You must be logged in to reply to this topic.