720looper-f
720looper-f
720-1
720Looper-3

720

Stereo Looper
An intuitive looper with 720 seconds (12 minutes) of stereo recording time on 10 independent loops and unlimited overdubbing that’s perfect for practice and live performance!

$181.40

Find a Dealer
Sound Clips
Octave Half Speed Feature
Reverse Mode
Menu
  • 720 | Stereo Looper
  • $181.40
  • Find a Dealer

720

DESCRIPTION

The EHX 720 Stereo Looper is a powerful looping tool with 12 minutes of stereo recording time, 10 loop memory banks, and creative performance functions. Its simple-to-use design makes it an easy and effective to use in both live and practice situations.

The 720 records in high-quality stereo for use with stereo effects or even use with two instruments. A second footswitch can be programmed to stop loop playback or toggle on/off the built-in Reverse and 1/2 Speed playback effects. The programmable Fadeout mode applys an automatic fade when playback is stopped.

    – Extra-long 12 minutes of stereo recording time

  • 10 independent loops
  • Undo-Redo, Reverse and ½ Speed Effects at the touch of a button
  • High-quality, uncompressed audio, 24-bit A/D/A converters plus 44.1kHz sample rate
  • Stereo in/out for enhanced usability… record two instruments at once
  • Foot controller input provides a way to use popular 3-button foot controllers to change a bank up or down, and gives access to instant Undo-Redo
  • Silent footswitches
  • Loop fadeout (trails) mode
  • Power adapter included

SPECIFICATIONS

Circuit
Digital
Bypass
Buffered Bypass
Audio
Stereo
Power Supply
9.6VDC-200mA power adapter included (optional 9V battery not included)
Dimensions (in)
4.75 x 4 x 2.25
Current Draw
75mA
Year Released
2015
UPC
683274011684
Owner's Manual
LEVEL KNOB
Controls the output level of the Loop.
LOOP FOOTSWITCH
Use the LOOP footswitch to record, overdub, and playback loops. The LOOP footswitch can also be used to stop and undo-redo loops.
STOP/FX FOOTSWITCH
The STOP/FX footswitch can be set to either STOP mode or FX mode. When in STOP mode, a dot appears on the display next to the STOP label. When in FX mode, the dot is off.
REC LED
Indicates when a loop is being recorded or overdubbed.
PLAY LED
Indicates when a loop is being played or overdubbed.
MEM LED
Indicates loop audio is in memory for the current loop bank.
LOOP KNOB & PUSH: MODE BUTTON
The LOOP knob allows you to select loops and the PUSH: MODE button has two functions: 1) to cycle through three available modes, and 2) to adjust the value of that mode.
REVERSE BUTTON
Press the REVERSE button to play the loop in reverse. The REVERSE button glows red when enabled. Reverse can be used at any time to playback or overdub a loop.
½ SPEED BUTTON
Press the ½ SPEED button to make the pitch of the loop to go down one octave and half the tempo. The ½ SPEED button glows red when enabled and can be used at any time during playback or while overdubbing a loop.
MONO/L INPUT
Plug the output of your instrument or another effects pedal into this jack.
R INPUT
Use this jack for stereo. Plug the output of your instrument or another effects pedal into this jack."
MONO/L
The Left output signal is sent through this jack.
R OUTPUT
The Right output signal is sent through this jack.
FC JACK
¼” TRS Foot Controller Jack. Use this jack with popular three button foot controller units to control the 720 bank up, bank down, and instant undoredo.

“EHX has delivered a high quality, full-featured looper with a generous amount of loop time. I’m adding this to my board no question.”

–Tone Report

Related Gear


Find a Dealer