Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • November 22, 2020 at 5:14 pm in reply to: EHXTortion stacked to Hot Wax #126634
    Kim Ov Moros
    Member

    I really enjoyed that, sounded very cool! :)

    November 1, 2020 at 2:34 pm in reply to: Mel9 & C9 badaDoom. #126588
    Kim Ov Moros
    Member

    Thanks! Looking forward to releasing this album very soon. The EHX stuff I use really do help make our sound unique and full.

    February 19, 2019 at 3:21 am in reply to: new ehx guitar speakers…how are they?? #124845
    Kim Ov Moros
    Member

    I know this post is quite late, but I only picked up a pair of the VR models to try out about 2-3 months ago.

    I have to say that I like these very much so far; enough to want another pair. I have them in a 4×12 cab with a pair of off-brand Legends and I like the results. Before, the quad of “Legends” were way too boomy in this particular cab and swapping out 2 of them for the EHX VR speakers really balanced the cab out. So I have another empty 4×12 that soon will get the same matching arrangement.

    Sorry I can’t be much more specific about these speakers as I have no way to directly A/B them with any others at this time. I’d like to do that in the near future as well, but I guess my bottom line here is that it was money very well spent and I’m very pleased to have spent so little for a huge improvement over what I had.

    September 17, 2017 at 2:21 am in reply to: Mel9 and C9 Questions #123156
    Kim Ov Moros
    Member
    Quote:
    I know keeping the output control lower forces you to pick harder and that in effect helps level your playing.

    I am VERY surprised a compressor does not help you. Place the comp after the 9,s and the comp sustain setting up .
    That has to limit the output of the pedal…

    Yes! Seems to work much better now as you suggested. Thank you!

    September 6, 2017 at 2:34 am in reply to: Mel9 and C9 Questions #123119
    Kim Ov Moros
    Member

    Thank you! I ‘ll try the Comp as you suggested. Maybe I didn’t have the settings dialed in correctly before…. :)

    November 6, 2016 at 2:52 am in reply to: Mel9 Failure #122219
    Kim Ov Moros
    Member

    I’ve had this happen to me a few times. The LED would be ON, but no sound.

    Unplugging the power supply from the pedal for a moment before replugging it back in would get the unit back in order.

    August 13, 2016 at 3:48 am in reply to: Mel9 weird noise? #121853
    Kim Ov Moros
    Member

    Yeah, I guess it’s harder to hear in the vid. It’s like the Gate on my preamp isn’t clamping down as it should. Just trying to figure this out; sorry if I was unintentionally misleading anyone that my Mel9 is defective…which is isn’t.

    The vid is just a chug power chord with no Mel9 effect (the effect goes to a different amp and speakers) But there’s that ZAP immediately after that chug just before the Reverb effect is heard.

    The signal chain is: Guitar > Mel9 (Dry Out) > Tremonti wah > rack preaamp/fx/poweramp > speakers A
    Mel9 (Effect Out) > Behringer Compressor/Limiter > Morley Volume > Crate Powerblock > speakers B

    EDIT:
    It was the Gate on my preamp. A simple resistor change and back in action. Thanks!

    August 10, 2016 at 3:39 am in reply to: Mel9 weird noise? #121838
    Kim Ov Moros
    Member

    Sorry, I posted the wrong link. Edited and here it is again:

    https://www.dropbox.com/s/b5xwhznxqnnbziv/VIDEO0082.mp4?dl=0

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)