Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 2, 2017 at 4:55 am in reply to: Pitch Fork: digital or analog? #123039
    cfibanez1
    Participant
    Quote:
    It is digital. An effect like this could NEVER be created in the analog domain.
    Please use the power supply that was included with the Pitch Fork to prevent and noise coming in from other pedals.

    Thanks, and please excuse my ignorance.

    I appreciate your recommendation about the included power supply, but with over 12 pedals in my board, it is not practical to run each of them with its own power supply. You ought to know by now that people needs third party power supplies to power multiple pedals, including yours. It would be more helpful for your customers if you provided more real-life guidelines about power, instead of stubbornly recommend your dedicated power supply.

    December 22, 2016 at 4:59 am in reply to: MEL9 Problem with isolated power supplies #122382
    cfibanez1
    Participant
    Quote:
    Not sure but I bet it will not if powering other pedals.I doubt each out is isolated
    In which case you need to use the EHX supply or get an Diago Noise Isolator Adaptor Cable or have noise.

    Thanks. I think the original poster said that he/she was using isolated power supplies. The problem discussed here is with the powering of the MEL9 unit, not with noise. Are you now saying that the diago Isolator Adaptor may also solve the powering problem? Thanks again!

    December 22, 2016 at 12:37 am in reply to: MEL9 Problem with isolated power supplies #122380
    cfibanez1
    Participant

    Thanks for the quick reply. I run my pedals with a Modtone Power Cell (http://www.modtone.net/store/p26/Power_Cell.html).
    Not sure whether it is isolated or not. Will it work with the MEL9? Thanks again. /C

    December 21, 2016 at 9:29 am in reply to: MEL9 Problem with isolated power supplies #122373
    cfibanez1
    Participant

    This is a big, big problem. Hope EHX understands how serious this is. Most people work with many pedals at the same time. We can not be expected to use a dedicated wall wart for each of them (!). I am hesitating making a purchase because of this issue. Many surely think the same. Hope this is solved soon. Please. Thanks.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)