Home › Forums › Help/Technical Questions › Stereo Polychorus (reissue) boosts signal

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 18, 2009 at 4:21 am #79335
    jwny72
    Member

    Just bought a new Stereo Polychorus. Cool pedal, I like the sounds it produces. I’ve only just begun to discover the sounds it can make–this is a very versatile pedal.

    However, it boosts my signal when it’s engaged.

    It’s not too bad when playing clean, but with a fuzz or distortion engaged, the volume increase from engaging the Polychorus is very noticeable. I often want to bring in some flange during the last few phrases of a solo–but not if it brings an increase in volume with it.

    Does anyone know if this is correctable? Is there an internal trim pot for output volume?

    November 18, 2009 at 11:27 am #103880
    The EH Man
    Moderator

    There are 2 trims you can adjust. They should be labeled as TP2 and TP3. TP3 works on the Chorus and delay modes while TP2 works on the Flange and Filter Matrix.

    November 18, 2009 at 3:08 pm #103887
    jwny72
    Member

    Thanks so much! I’ll twiddle with those and see what results I get. Thanks again!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.