Home Forums Help/Technical Questions Sovtek Big Muf Pi – Troubleshooting Help

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #84186
    BobJr
    Participant

    Greetings,

    I have a Version 7, Third Edition Sovtek Big Muff Pi from the early 90’s. I had it in storage for about 10 years. Unfortunately it was in a hot attic for 5 or 6 months out of each year. I just recently liberated it from the attic and found that it seems to be dead. I replaced the battery of course and clicked the switch a bunch to no avail. There is no led action at all.

    Does anyone have any advice for me on how to best troubleshoot this thing.

    I hear it has become quite valuable and I don’t want to break it worse trying to fix it.

    Thanks in advance.

    Bob

    #121086
    gemather
    Member

    I had such an issue with the bipolar 100uF capacity.
    There is only one inside, the others are ceramic.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.