Home › Forums › Help/Technical Questions › Small Clone Problem

Viewing 8 posts - 16 through 23 (of 23 total)
1 2
  • Author
    Posts
  • January 5, 2009 at 6:13 pm #90122
    electro-melx
    Moderator
    Quote:
    what trips me out is the email is from someone named Chip at Sovtek..

    yeah, Chip’s the man……I’ve had emails from him before.

    January 5, 2009 at 7:56 pm #90128
    IndianScout
    Member

    here we go back in circles again

    Quote:
    Chip
    to me

    show details 1:20 PM (34 minutes ago)

    Reply

    Hello. We delete older emails due to the amount received daily. Please reply with what this is regarding.

    Regards,

    January 21, 2009 at 11:38 pm #91380
    indicajohn
    Member

    So what was actually wrong with the pedal? cos’ i have exactly the same problem.

    January 24, 2009 at 3:30 am #91539
    SaMpLeGoD
    Member

    Could this be possible, mine has the same problem… it always dry signal, but the LED lights up… I think the problem could be in the Switching FET or in the mixing stage after the LM358. I don’t really know… I tested the signal path, seems to be right… tested the voltage for the ICs, all’s receiving it… I don’t know, it just stop workin.
    Could someone send me the original Schematic? need to know exactly what’s hat 100k trim do… I think is to adjust the frequency for the CD4047… I’m not sure.

    Regards,

    Eddie

    February 8, 2009 at 3:13 am #92897
    rocket
    Member

    Hey, I got a Small Clone a few years ago supposedly brand new (it was from an online auction ect.) Anyway, I have always had the same problem. The light comes on but no change to the sound. What was the answer to the problem with yours? I would appreciate any knowledge. In my case, the guy who sold it to me didn’t reply to any of my complaints and I didn’t have the money to send it off for repairs and felt a bit burned that I had bought something that needed to be repaired already.

    February 8, 2009 at 5:46 pm #92925
    mcconnachiea
    Member

    From what I’ve been told, it is the trimpot than needs ajusting

    February 9, 2009 at 2:12 am #92957
    rocket
    Member
    Quote:
    From what I’ve been told, it is the trimpot than needs ajusting

    So do I email Electro Harmonix about this or can I do it myself?

    February 10, 2009 at 9:56 pm #93044
    mcconnachiea
    Member

    Mail EHX. It is hit and mis ajusting that thing

  • Author
    Posts
Viewing 8 posts - 16 through 23 (of 23 total)
1 2
  • You must be logged in to reply to this topic.