Home Forums Help/Technical Questions Russian Big muff won’t allpw clean tone threw

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #79362
    InvaderCC
    Member

    I just bought a Russian Big Muff..The pedal sounds great but when turned off won’t let any sound threw..Is this normal or is there something wrong with this pedal?

    #104042
    The EH Man
    Moderator

    Your pedal has problem. It should let your clean sound through.

    #104045
    electro-melx
    Moderator

    something is faulty there, take it back.

    #104060
    devnulljp
    Participant

    Bad switch?

    #104062
    pigeonman
    Member

    Yup i have a similar problem.

    When i go from fuzz to bypass the pedal will often cut out / be at a massively reduced volume and i need to wiggle the switch to get the bypass sound.

    I’ve been advised to fit in a new switch but haven’t got round to it yet. In the mean time i’m using a bypass loop pedal to go from fuzz to bypass.

    If any one has suggestions outside of this please say.

    (Also switch cleaner gave a temporary improvement).

    Pigeon MAN

    #104071
    electro-melx
    Moderator
    Quote:
    Yup i have a similar problem.

    When i go from fuzz to bypass the pedal will often cut out / be at a massively reduced volume and i need to wiggle the switch to get the bypass sound.

    I’ve been advised to fit in a new switch but haven’t got round to it yet. In the mean time i’m using a bypass loop pedal to go from fuzz to bypass.

    If any one has suggestions outside of this please say.

    (Also switch cleaner gave a temporary improvement).

    Pigeon MAN

    sounds like the switch for sure… if cleaner gave a temporary improvement try more cleaner and press the switch continuously for a few mins (or until you get bored) it might do the trick, if not I’d re-solder the switch and if it still plays up replace it.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.