Home › Forums › Help/Technical Questions › Repair Green Muff switch

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 21, 2011 at 9:45 am #81861
    devnulljp
    Participant

    Got a bubble font Green Muff w/ a dead switch.
    Questions: Might as weel TB it right? I’m guessing this diagram will work for that version…
    How do you get that big “collar” thing the original switch passed through off?

    [IMG]”http://i440.photobucket.com/albums/qq123/devnulljp/Fuzz/Big Muffs/green-bubble-worn/b8c7ff4d.jpg”[/IMG]

    Anyone ever seen one of these with a hole drilled for an AC tap? This one has a hole up between the jacks that looks like it was put there at the factory — the finish goes through the hole, there’s no sign of it being done after the case was painted. I’ve never seen that before

    [IMG]”http://i440.photobucket.com/albums/qq123/devnulljp/Fuzz/Big Muffs/green-bubble-worn/14b35003.jpg”[/IMG]

    August 21, 2011 at 11:08 am #115742
    The EH Man
    Moderator

    I use a Dremel and cut the collar off.

    Looks like it was originally drilled for an AC jack like the Bassballs and Small Stone were. I don’t know why they never installed one on the Big Muffs.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.