Home Forums Vintage EHX Powering vintage 24v pedals using daisy chain

Viewing 1 post (of 1 total)
  • Author
  • #191238

    I am using bass micro synth and qtron from 90’s that requires 24v power supply. I tried to power them using daisy chain cable, because I need 2 power outputs for 1 pedal on pedal power 2 plus to get 24v. When I conencted them, the microsynth is off. If I disconect qtron the microsynth turns on. I measured the power on both connectors and it is 24v. I have 100mA output current and the both pedals should use somewere around 80mA if I’m right. I also tried powering with 200mA output but it didn’t work. Also tried to daisy chan using original power supply but everything the same.
    What could be the problem?

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.