Home › Forums › Tips, Tricks, Clips, and Pics › Oceans 11 effects

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 2, 2020 at 12:08 am #86083
    Wpushaw
    Member

    I have 1 Oceans 11 and use three different settings in any single set. Right now I have to change the settings by hand, Short of buying 2 more pedals and linking the three, is there an EHX combo board with the same algorithms that can be switched by foot instead?

    January 8, 2020 at 4:27 am #125729
    gvelasco
    Member

    No. The Oceans 11 is a fantastic pedal, but I think the lack of presets is unfortunate. Fortunately, it does remember your settings from one reverb to another, but if you want to use the same reverb with different settings, you just have to do it by hand. :-(

    March 25, 2020 at 10:15 pm #125959
    AlvarHanso
    Participant

    The Ocean’s 12 that will be coming out soon should solve this problem. For a while I had a Canyon and an Ocean’s 11, and my favorite on each was the Shimmer, but if I needed to change, I mainly did the Shimmer in the Canyon and then switched reverbs on the 11, usually trying by foot, sometimes successfully, sometimes not. I took the Canyon off when I got a Source Audio Collider, but am still getting the 12. That Tide feature is going to rock my boat!

    If you haven’t seen it, check out the new Bill Ruppert video.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.