Home Forums Help/Technical Questions Noisy Stereo Electric Mistress

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #82264
    Uromastyx
    Member

    Hello all,
    I bought a (supposedly) new Stereo Electric Mistress on ebay. Once I got a power supply, I’ve found it sounds horrible. With all 3 knobs at 0, it’s just noisy. As you increase the flange and rate, it’s unbearable.

    Note: I’ve tried multiple cables, long, short, cheap, expensive, no change in sound. Also tried plugging in the power supply to a surge strip, direct to the wall, and even thru a filtered power supply, again no change in noise levels.

    Sound link attached, recorded direct in, guitar pup volumes set to 0.
    http://soundcloud.com/uromastyx/ehx-noise

    Any suggestions or ideas? Did I get ripped off, or is it supposed to sound this horrible?

    Thanks,
    Johnny

    #117290
    Uromastyx
    Member

    Re-Bump? Anyone got any ideas?

    #118231
    Uromastyx
    Member

    Third re-bump. nothing?

    #118232
    lucianmaximo
    Member

    I thing you should try using different power supplyes! EHX have a lot of problems with that…

    #118250
    octa805
    Member

    I have one. it does not make those crazy noises

    send it back to EHX

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.