Home › Forums › Help/Technical Questions › Micro POG LED issues

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 4, 2009 at 8:30 am #78905
    pencil-in
    Member

    Hello,

    I sent my Micro POG back to the retailer as it’s status LED was flickering and sometimes would not come on at all… the retailer sent it to an EHX repair centre in Germany… I got the unit back after about 4 weeks, and now the LED still FLICKERS!!!… I don’t want to have to send it again.

    I also noticed that when you first power-up the unit, the LED comes on for a split-second, despite whether in bypass or not…

    Is the LED wired direct to the switch?

    Is the unit true-bypass?

    Does the LED get triggered by the switch or by the digital circuit?

    Is the LED going to one day stop working all-together from it’s pole on the switch failing, or is it just always going to be intermittent with problems from a bad algorithm?

    What the hell is wrong with my pedal?

    September 8, 2009 at 9:27 am #101283
    pencil-in
    Member

    ???

    September 8, 2009 at 12:15 pm #101286
    electro-melx
    Moderator

    I don’t think the micropog is true byapsss, if I remember correctly…..I can’t help any more than that, sorry.

    ….are you using the correct power supply?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.