Home Forums Help/Technical Questions HOG2 expression questions

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #82925
    AdamSH89
    Participant

    Ok. Looking at what this thing does:

    Capable of all the sounds of the POG2.
    Capable of the sounds of the Freeze pedal
    Wah-wah
    Expression controlled filter

    Here’s my big question:
    Can I use the volume setting to make one preset into using this thing as an absurdly overpriced and over complicated volume pedal too? or do the expression paramaters only affect the various generated octaves?

    If I can’t, then that’s cool. But if I can, so much cooler.

    #118833
    MattInVegas
    Member

    Yes. One setting can be entirely set to a volume pedal, but its the wet “synth” sound. It’s a little different that playing straight through a volume pedal. Or wah pedal, for that matter.

    When you set a voicing like cello or flute, the volume setting can come into play more. The freeze settings get more overall use, especially when your master portamento [gliss setting] with the exp pedal.

    #118840
    AdamSH89
    Participant

    So the volume will only affect the generated voices, and not the dry signal, not the master volume parameters? Shucks. I was hoping to have the expression pedal simply take the place of the volume pedal on my board.

    #118842
    AdamSH89
    Participant

    Well, does anyone know the value of the potentiometer necessary for an expression pedal to be compatible with this fella?

    #118843
    AdamSH89
    Participant

    Just to bump and make clear questions I’m asking:

    1.) am I right in understanding that the “volume” setting for the expression pedal is applicable only to the generated voices, and not to the “dry output” or “master volume” parameters?

    2.) What value does the potentiometer have to be to be compatible with the HOG2? 10k?

    3.) [new question] what are the dimensions of the HOG2? is this sequel the same size as the first HOG?

    Thanks all

    #119020
    Flystrat
    Member
    Quote:
    Just to bump and make clear questions I’m asking:

    1.) am I right in understanding that the “volume” setting for the expression pedal is applicable only to the generated voices, and not to the “dry output” or “master volume” parameters?

    2.) What value does the potentiometer have to be to be compatible with the HOG2? 10k?

    3.) [new question] what are the dimensions of the HOG2? is this sequel the same size as the first HOG?

    Thanks all

    Hi

    1 – Yes, volume applies only for the generated voices. If you pull up “dry output” slider, this is not affected by the expression pedal action. I just tried it.
    2 – I use a Boss FV500H in the expression connection, which is said to be 8.5K and it works perfectly.
    3 – wide 9.25″, deep 6″, height 1.25″ the body, 2.5″ considering rubber feet and footswitches.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.