Home › Forums › Help/Technical Questions › HOG problem : blinking sound

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 2, 2012 at 7:40 pm #82443
    LaSp
    Member

    Hello everybody

    My hog is not functionning right.
    I can’t use it anymore.
    I don’t have warranty
    I use original power supply (500mA 9DC european, france)

    I am willing to try to repair it myself as you can see here on this little video I made to show the problem : (if you never saw an opened HOG that can be cool too)

    http://youtu.be/NEzVSQd3lrw

    So the sound is blinking with the light. It’s like several reset.
    Seems related to power but what do I know.

    Thanks

    July 4, 2012 at 2:51 pm #117844
    Kekke466
    Member

    Did you check for cold solder joints? I would take a close look on the joints of the sliders.

    July 4, 2012 at 8:46 pm #117845
    LaSp
    Member

    Yes I checked for all solder joints, that’s why I dismembered the poor HOG in the first place.
    I’ll check again just to be sure at sliders, and report back.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.