Home › Forums › Help/Technical Questions › Deluxe Electric Mistress

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 13, 2009 at 3:30 pm #77538
    aznyaz
    Participant

    Hi, this is my first time on this site. I aquired a well worn Deluxe Electric Mistress quite a few years back on Ebay and it appeared to work until the filter matrix switch disintegrated. I replaced it and made all connections as they were on the original switch. Since I had not used it extensively I was unaware of the color pot not working. It has negligible effect on the sound so all I can get out of it is a chorus effect. As for replacing the pot, I shouldn’t have any trouble, appears to be just 3 wires. Does anyone know if this is a possible deeper problem?

    Thanks.

    MJ

    January 13, 2009 at 3:49 pm #90630
    The EH Man
    Moderator

    I would check the solder joints where the pot connects to the circuit board.

    January 13, 2009 at 4:09 pm #90636
    aznyaz
    Participant

    Thanks. I just thought of another ? Can you give me the values of the pots so I can check to see if they’re correct?

    Thanks.

    MJ

    January 13, 2009 at 4:15 pm #90638
    The EH Man
    Moderator
    Quote:
    Thanks. I just thought of another ? Can you give me the values of the pots so I can check to see if they’re correct?

    Thanks.

    MJ

    Color: 10K
    Rate: 1M
    Range: 100K

    I took these values from a schematic for a vintage Electric Mistress but I believe it’s the same for the newer ones.

    January 13, 2009 at 4:28 pm #90639
    aznyaz
    Participant

    Thsnks again.

    MJ

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.