Home › Forums › Help/Technical Questions › AC/DC adapter for Holy Grail & Small Clone

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 27, 2009 at 9:58 am #77628
    bussebusse
    Participant

    Hello!

    Last week I bought 2 EHX effects: Holly Grail (witch original 9V 500 mA adapter) and Small Clone (without adapter). My local EHX dealer doesn’t sell adapter dedicated to Small Clone. So I have some questions:

    – Can I run both effects with the adapter dedicated to Holy Grail?
    – How many mA they need?
    – Is the Holy Grail adapter stabilized?

    Thank you for your help!

    January 27, 2009 at 1:36 pm #91976
    dsl1
    Member

    Yes you can use the Holy Grail Adapter for the Small Clone.

    The Small Clone requires (according to EHX) 9V/100mA.

    The Holy Grail requires about 9V/220mA.

    January 27, 2009 at 7:01 pm #92012
    bussebusse
    Participant

    Ok, thank you. But my question is: can I supply both effects simultaneously with this adapter?

    January 27, 2009 at 7:08 pm #92014
    oolliivviieerr
    Member

    Buy a Diago Powerstation! I use it with my EHX Germanium OD and other pedals simultaneoulsly, and it sounds perfect (noise free)!

    January 27, 2009 at 7:12 pm #92015
    julian
    Moderator

    Yeah, with a daisy chain. Though that may cause some noise.

    Honestly, until you get a nice solution like a Voodoo Labs pedal power 2, the best solution is to use a 1spot (or a diago or a godlyke adapter) for all your analog 9v pedals, and then use the provided power supplies for all your other pedals on a power strip.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.