Home › Forums › Help/Technical Questions › Mixing Mel 9 and Synth 9 pedals together
- This topic has 21 replies, 3 voices, and was last updated 7 years, 2 months ago by Folkstone57.
-
AuthorPosts
-
May 15, 2017 at 6:59 pm #84905claxorParticipant
I’m trying to avoid using a separate mixer/switcher for combining the tones of the Synth 9 and the Mel 9 together to play both at once. Would this scenario work?:
Connect serially both pedals together (using only the “effect output” on both pedals), and on the first pedal having 0% Dry, 100% Synth/Effect; and the second pedal that it is feeding into, have 50% Dry, 50% Synth/Effect
This should blend the sounds of both pedals nicely, no?
Thanks!
May 15, 2017 at 10:03 pm #122876EHX STAFFKeymasterSorry no.
Your straight guitar sound need to feed both pedals.You could then combine both outputs together with a switchblade plus and not need a mixer
May 15, 2017 at 10:14 pm #122880claxorParticipantQuote:Sorry no.
Your straight guitar sound need to feed both pedals.You could then combine both outputs together with a switchblade plus and not need a mixer
Ok, but what about changing the levels of one pedal over the other pedal?
May 15, 2017 at 11:15 pm #122881claxorParticipantIsn’t the SwitchBlade Plus only directional as in one input to two outputs? Or, are you suggesting that the SwitchBlade Plus signal move from two inputs (the labeled A/B outputs) into one output (the labeled input)?
What about the tuner connection? Would it receive the same signal the labeled input connection is sending out? Confused.
May 16, 2017 at 2:51 pm #122882EHX STAFFKeymasterYou would change levels with the volume knobs on each 9 pedal.
Yes the coll thing about the switch blade plus is it is bidirectional and it will mix to down to one or switch between them..So you would take guitar into Mel9 and its out to one input of the switchblade plus the the Mel9 dry out out go the in of the Synth 9 and its output to the second in on the switch blade.
May 16, 2017 at 4:03 pm #122883claxorParticipant1) Ok, but what about the tuner out jack in this scenario? Would it send a duplicate signal out just as the input is now sending out?
2) Would both jacks send signal from both mixed pedals? In other words, not the synth 9 on one jack and the Mel 9 on the other jack, but a mix of both pedals?
May 17, 2017 at 3:26 am #122885EHX STAFFKeymasterYes if you hit the switch that says A+B both inputs will mix to one.
I will set it up tomorrow and report what the tuner out outputs.May 17, 2017 at 4:31 pm #122887claxorParticipantQuote:Yes if you hit the switch that says A+B both inputs will mix to one.
I will set it up tomorrow and report what the tuner out outputs.Ok, thank you! Let me know what you discover!
May 17, 2017 at 5:20 pm #122888EHX STAFFKeymasterWhen it is used as a passive mixer(in reverse) the tuner out does not work.
Also there is a little gain reduction when both are mixed but just a little.
It is passive that is how it works.May 17, 2017 at 6:50 pm #122889claxorParticipantQuote:When it is used as a passive mixer(in reverse) the tuner out does not work.
Also there is a little gain reduction when both are mixed but just a little.
It is passive that is how it works.Is the gain/level reduction worth getting a small mixer, or can increasing levels on the pedals compensate when using the Switchbalde Plus? (I’m looking for the best sound fidelity)
May 18, 2017 at 1:49 pm #122893EHX STAFFKeymasterIt would be better with a mixer but the switch blade+ did not suffer a fidelity issues ,just a little output I compensated for using the effect knob.
May 18, 2017 at 2:06 pm #122894claxorParticipantOk, so why would it be better with a mixer?
May 18, 2017 at 8:35 pm #122896EHX STAFFKeymasterYou wound not lose any output gain if that is an issue with you.
May 23, 2017 at 12:41 am #122906claxorParticipantDoes it make any difference if the Swotchblade Plus is powered? Meaning, will the tuner out send out signal, and the pedals’ levels are better?
May 23, 2017 at 1:47 pm #122907EHX STAFFKeymasterNo that just powers the LEDS
-
AuthorPosts
- You must be logged in to reply to this topic.