Home Forums Help/Technical Questions Please help. pedal board question

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #77435
    toppsseller
    Member

    I was thinking about buying a power brick to power my pedals. I have a dunlop crybaby, TS9 and a Big Muff pi. I notice that the polarity is different for the Big Muff. Do I need to buy an adaptor to reverse the polarity? I was looking at the gator gbus8 or the Dunlop power brick? Any help would be appreciated.

    #89596
    julian
    Moderator

    It’s expensive
    but personally I really like the Voodoo Labs Pedal Power 2+
    for several reasons-
    1. All 8 outputs are isolated- that means that you will avoid grounding issues and noise issues
    2. Because they are isolated, you can wire two outputs together for more power’
    3. You can power 9, 12, 18, or 24 volt pedals
    4. It has no problems with high current 9v pedals
    5. It has a courtesy outlet for hooking up wall warts for pedals it can’t power

    On the Dunlop Power Brick, the outputs are non-isolated, which can lead to noise and hum issues. And you can only power 9v pedals with it.

    For you right now, I’d suggest you get a 1spot. You’ve only got 9v pedals and don’t have huge demands. The 1spot is just as good as the DC Brick, and can be had for about 20 bucks. Then you just need to get an adapter for the Big Muff, which Visual Sound sells.

    #89602
    tubezipper
    Moderator
    Quote:
    It’s expensive
    but personally I really like the Voodoo Labs Pedal Power 2+
    for several reasons-
    1. All 8 outputs are isolated- that means that you will avoid grounding issues and noise issues
    2. Because they are isolated, you can wire two outputs together for more power’
    3. You can power 9, 12, 18, or 24 volt pedals
    4. It has no problems with high current 9v pedals
    5. It has a courtesy outlet for hooking up wall warts for pedals it can’t power

    On the Dunlop Power Brick, the outputs are non-isolated, which can lead to noise and hum issues. And you can only power 9v pedals with it.

    For you right now, I’d suggest you get a 1spot. You’ve only got 9v pedals and don’t have huge demands. The 1spot is just as good as the DC Brick, and can be had for about 20 bucks. Then you just need to get an adapter for the Big Muff, which Visual Sound sells.

    +1

    #99756
    TheCapitalJ
    Member

    Or you could get a fuel tank junior

    #99760
    B.Daws
    Participant

    I would say get a God-Lyke over the one spot. It has more mA (or at least mine does) and let me tell you I have two pedal boards daisy chained together with over 20 pedals and perfect power with no noise. It really is that awesome!

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.