Forum Replies Created
-
AuthorPosts
-
EHX STAFFKeymaster
The B9 is designed for use with the supply included with the pedal.
We have no control over other companies power supply.
Use the original.EHX STAFFKeymasterNo it needs the EHX supply which is included with the pedal.
EHX STAFFKeymasterIt is best to write service at info@ehx.com
EHX STAFFKeymasterPlease contact service at info@ehx.com
December 7, 2015 at 5:16 pm in reply to: Deluxe Memory Man Tap Tempo 1100. Any plans on making them available again? #121068EHX STAFFKeymasterIts back very soon at a great price…
EHX STAFFKeymasterThat was a great pedal! I have one in my own collection.
EHX STAFFKeymasterMike will not tells us why there are two versions…
They are starting to ship tomorrow.EHX STAFFKeymaster3
Multi Tap Delay/Echo w/ 3 Repeats while Using Tap Tempo
1. Use the same connections as in the steps above.
2. Turn the HAZARAI knob so that the MULTI TAP-1 SEC + REV LED is lit.
3. Turn the following knobs to 12 o’clock: BLEND, DECAY and FILTER.
4. Turn the REPEATS knob to 9 o’clock. This should yield approximately 3 repeats.
5. TAP in a delay time by pressing and
releasing the TAP Footswitch at least two
times. The time between taps
will be your delay time.
6. To change delay time, either tap in
a new time or turn the DELAY knob.MULTI TAP Echoes
The Multi Tap echo modes allow a musician to
set the exact number of delay repeats and
the relative volume of each repeat for thei
r echo. Instead of hearing the repeats fade
away, you could set the SMMH so that it produces exactly 3 repeats and each repeat is at
the same volume. The Multi Tap modes allow th
e musician to set the SMMH to repeat the
echo a fixed number of times up to 30 repeats (as long as there is enough delay memory).
In addition, the SMMH can be co
nfigured so that all repeats playback at the same volume,
decrease in volume with each repeat or
increase in volume with each repeat.
3 SEC MULTI TAP Mode:
The DELAY knob’s maximum time is 3 seconds.
1 SEC MULTI TAP Mode:
The DELAY knob’s maximum time is 1 second.
1 SEC + REV MULTI TAP Mode:
The DELAY knob’s maximum time is 1
second. Of the 8 modes, this is the only one where holding the down the TAP
footswitch does not record or overdub a
loop. Instead, at the moment that one
presses the TAP footswitch, a backwards version of the dry signal will start to
play, starting with the most recent and
continuing while the footswitch is held,
up to a maximum of 6 seconds. This is
useful when the musician wants control
over exactly when to begin reverse playback. For example you could play and
hold a chord, after a few seconds, hold
down TAP and you will hear your chord
play backwards.EHX STAFFKeymasterIt should be very punchy! What supply are you using?
EHX STAFFKeymasterYour best to get a rechargeable 9 volt battery pack to run it.
quote author=”mojine” date=”1449431651″]Can you run the C9 on batteries? Even if short lived[/quote]
EHX STAFFKeymasterI would place the comp and od stuff in front of the CF. BUT there is no rule. Its up to what sounds good to you.
November 25, 2015 at 4:47 pm in reply to: Memory Man with Hazarai – Anyone find a solution for this issue? #121022EHX STAFFKeymasterPlease contact service!
info@ehx.comSorry for your problems.
EHX STAFFKeymasterThese should be shipping early December.
October 28, 2015 at 2:36 am in reply to: Brand New POG2 – Exceptionally Stiff Bypass Switch/Button (Preset Switch seems OK) #120968EHX STAFFKeymasterHaggleLad The bypass is a mechanical switch and will feel stiff compared to the soft switch used for presets.
Sorry, we are searching for a true bypass switch that is “soft” and does the job many thousands of times in a row. -
AuthorPosts