Home Forums Help/Technical Questions Big Muff deluxe bass – no sound when bypassed

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #198465
    fastcoretux
    Participant

    Hi,
    I use Big Muff deluxe bass and suddenly signal stoped passing through the pedal when is bypassed.
    When pedal is turned on, everything works normally including red LED.

    What should be a problem?

    Thank you for any advice.

    Take care.

    #198486
    EHX STAFF
    Keymaster

    It could be a dirty switch that can be fixed with a good contact spray like deoxit.
    If not please write the techs at info@ehx.com
    They can help you out.

    #198503
    fastcoretux
    Participant

    The problem was in connection of one wire of ribbon cable which was poorly connected. When I took switch out, all cables suddenly disconnects from the switch PCB. So I desolder rest of old wires, cut a ribbon cable little bit and solder it again and everything works.

    Anyway thank you for your advice!

    Take care.

    Best regards
    Ondrej

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.