Home › Forums › Help/Technical Questions › Big Muff Bass Deluxe – Resistor R68 or electric scheme

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 22, 2018 at 4:10 pm #85215
    ais.reis
    Participant

    I need the R68 value or the Big Muff Bass Deluxe electric scheme.
    Some picture near the R68 from the board would help too.

    February 23, 2018 at 4:37 pm #123623
    EHX STAFF
    Keymaster

    response from the tech

    10 Ohms. Photo attached, though if that resistor blew up he either used an incorrect power supply, or something in the pedal is shorted and drawing way too much current.

    February 26, 2018 at 3:09 pm #123632
    ais.reis
    Participant
    Quote:
    response from the tech

    10 Ohms. Photo attached, though if that resistor blew up he either used an incorrect power supply, or something in the pedal is shorted and drawing way too much current.

    It works!!!!
    Thanks

    April 27, 2023 at 11:33 pm #198682
    redelses
    Participant

    Hi – just wanted to confirm that 10 ohm was the correct size for the R68 resistor? Also looks to be about 1.8mm wide by 5.5mm long?
    Thank you!

    April 29, 2023 at 10:58 am #198688
    EHX STAFF
    Keymaster

    yes

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.