Congratulations on your purchase of the Holy Grail. The small enclosure insures a pedal board friendly fit while delivering a superb reverb prized by musicians around the world.
The Holy Grail is Digital Reverb in a compact guitar pedal. It contains three different reverb algorithms: SPRING, HALL, and FLERB. All three algorithms were designed and tailored for the electric guitar but they will work equally as well on most instruments and voices. The SPRING algorithm is a recreation of the classic spring reverbs that are found in many guitar amplifiers. The HALL algorithm is a new, lush reverb. Finally FLERB is a beautiful reverb like nothing you have heard before and may help you play your instruments in new ways.
-THEORY OF OPERATION-
Connect your instrument into the INPUT jack and your amp into the OUTPUT jack. Plug the DC adaptor into the US96DC-200BI jack and then plug the DC adaptor into a wall outlet.
The STATUS LED indicates when the effect is switched on. The footswitch engages and disengages the Reverb effect.
The REVERB knob acts like a Wet/Dry control. As you turn the REVERB knob clockwise you will hear more reverb and less of your dry instrument. The Holy Grail is designed so that as you turn the REVERB knob from its minimum position to the 12 o’clock position you will hear a subtle amount of reverb added to the output. As you turn the REVERB knob from 12 o’clock to its maximum position the amount of reverb you hear will increase dramatically. It is designed this way so musicians can hone in on just the right amount of subtle reverb added to their instrument’s signal. The Slide Switch chooses between the three different reverb algorithms. The Slide Switch chooses between the three different reverb algorithms.
- WARRANTY INFORMATION -
Please register online at https://www.ehx.com/product-registration or complete and return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product that fails to operate due to defects in materials or workmanship for a period of one year from date of purchase. This applies only to original purchasers who have bought their product from an authorized Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period, please contact the appropriate office listed below. Customers outside the regions listed below, please contact EHX Customer Service for information on warranty repairs at firstname.lastname@example.org or +1-718-937-8300. USA and Canadian customers: please obtain a Return Authorization Number (RA#) from EHX Customer Service before returning your product. Include with your returned unit: a written description of the problem as well as your name, address, telephone number, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
c/o NEW SENSOR CORP.
55-01 2ND STREET
LONG ISLAND CITY, NY 11101
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
Tel: +44 179 247 3258
This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending upon the laws of the jurisdiction within which the product was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at email@example.com
- FCC COMPLIANCE -
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment under FCC rules.