EHX.com | Vintage Electric Mistress 18V - power supply info...?

Vintage Electric Mistress 18V - power supply info…?

Post Reply

BigStone

Newbie

Total Posts: 14

Joined 2012-02-21

Posted: 22 February 2012 11:50 PM

Hello,

I just ordered a vintage Electric Mistress pedal, the older one with green lettering. To my knowledge this is an 18V pedal (accepts two 9V batteries).

I’ve never actually seen one of these pedals in person. Do they have an input jack for an external power supply? If so, what type of input is it (1/8” jack, or…)? Is there a current power supply unit that can be purchased that will work with this pedal?

I do have a power supply “brick” with an 18V output… hopefully it would just be a matter of me getting a cord with the right jack on the end to fit the pedal.

Any other info regarding this subject appreciated.

(PS - I never use batteries in my pedals, always use external power, so hopefully I can figure out an external power option for my new vintage EM. Thanks!)

Quote

The EH Man

Administrator

Total Posts: 2216

Joined 2008-10-30

Posted: 23 February 2012 05:37 AM | Link to this reply (#1)

It has a 1/8” jack on the back for an 18vdc supply. The plug is 1/8”, positive tip.

Ron Neely II
The EH Man, All-Knowing Guru of Electro-Harmonix
Electro-Harmonix info: http://electroharmonix.vintageusaguitars.com

EHX Customer service: http://newsensor.com/CutomerServices.aspx
Questions about power supplies w/ EHX products?: http://www.ehx.com/forums/viewthread/2957/
EHX power supply info and requirements: https://spreadsheets.google.com/ccc?key=0Ak9R7oW8W8MidHhCOHdKSkFTdGowdklDd2sza2VXMFE&hl=en&authkey=CJXI1aEF

Quote

BigStone

Newbie

Total Posts: 14

Joined 2012-02-21

Posted: 23 February 2012 10:57 AM | Link to this reply (#2)

The EH Man - 23 February 2012 11:37 AM
It has a 1/8” jack on the back for an 18vdc supply. The plug is 1/8”, positive tip.

Beautiful. I have a power brick with an 18V output and a cord for the brick with 1/8” jack, positive tip… looks like I’m all set.

Thanks so much EH Man, you’ve been incredible helpful.

Quote

synthaxe

Newbie

Total Posts: 14

Joined 2012-05-08

Posted: 08 May 2012 03:47 PM | Link to this reply (#3)

The EH Man - 23 February 2012 11:37 AM
It has a 1/8” jack on the back for an 18vdc supply. The plug is 1/8”, positive tip.

Hey EH Man,

I have a small clone and an issue j small stone. Both have the 1/8” input for power supply on the back. Where can I get the correct supplies for these? 1/8”....? Thanks.

Quote

The EH Man

Administrator

Total Posts: 2216

Joined 2008-10-30

Posted: 08 May 2012 04:53 PM | Link to this reply (#4)

synthaxe - 08 May 2012 08:47 PM

Hey EH Man,

I have a small clone and an issue j small stone. Both have the 1/8” input for power supply on the back. Where can I get the correct supplies for these? 1/8”....? Thanks.

http://www.ebay.com/itm/electro-harmonix-9DC100-9-Volt-AC-Adapter-/120897551288?pt=LH_DefaultDomain_0&hash=item1c260e3bb8#ht_500wt_969

Ron Neely II
The EH Man, All-Knowing Guru of Electro-Harmonix
Electro-Harmonix info: http://electroharmonix.vintageusaguitars.com

Quote

synthaxe

Newbie

Total Posts: 14

Joined 2012-05-08

Posted: 08 May 2012 07:38 PM | Link to this reply (#5)

The EH Man - 08 May 2012 09:53 PM
synthaxe - 08 May 2012 08:47 PM

Hey EH Man,

I have a small clone and an issue j small stone. Both have the 1/8” input for power supply on the back. Where can I get the correct supplies for these? 1/8”....? Thanks.

http://www.ebay.com/itm/electro-harmonix-9DC100-9-Volt-AC-Adapter-/120897551288?pt=LH_DefaultDomain_0&hash=item1c260e3bb8#ht_500wt_969

Much appreciated..

Quote

Post Reply