My power supply went dead after 37 days after date of purchase so i can not take it back…Which is the correct power supply number?I can not find one list for 45ma 9volt center negative…

You can use one w/ a higher mA rating as long as the voltage and polarity are correct.

The EH Man - 13 March 2010 07:07 AM

You can use one w/ a higher mA rating as long as the voltage and polarity are correct.

Thanks that is were the confusion came in i see they have one listed as a 55ma 9vDC..But not the 45ma thanks again for the help…

InvaderCC - 13 March 2010 02:01 AM

My power supply went dead after 37 days after date of purchase so i can not take it back…Which is the correct power supply number?I can not find one list for 45ma 9volt center negative…

This one:

http://accessories.musiciansfriend.com/product/ElectroHarmonix-US96DC200BI-9VDC-Guitar-Effects-Power-Supply?sku=150487

Or you could use a 1 Spot.

Flick (EHX Staff) - 15 March 2010 03:11 PM

InvaderCC - 13 March 2010 02:01 AM

My power supply went dead after 37 days after date of purchase so i can not take it back…Which is the correct power supply number?I can not find one list for 45ma 9volt center negative…

This one:

http://accessories.musiciansfriend.com/product/ElectroHarmonix-US96DC200BI-9VDC-Guitar-Effects-Power-Supply?sku=150487

Or you could use a 1 Spot.

Hi there, newby alart here..  :thumb:

Is it possible to power the Memory Boy with a 1Spot (or in my case: Cioks Big John)??
That would be nice.
Just a normal Boss style (center negative) plug?

As Flick says: you can use a 1spot, don’t know of the Big John, but as long as it is 9v and has enough mA it would do the work!

Toonster - 20 March 2010 11:00 AM

As Flick says: you can use a 1spot, don’t know of the Big John, but as long as it is 9v and has enough mA it would do the work!

The Big John is sort of a luxe 1Spot (more like the voodoo lab pedal power).

I just wanted to verify if there aren’t any negative site-effects when hooked up a shared power supply. I also read a post that there will be negative impact on your effects chain when no seperate power supply is used for the Memory Boy.

The Big John has 600mA output power (googled that), so as long as your pedal rig is underneath that, you will have enough power and no problems..

rocker_71 - 20 March 2010 11:12 AM

I just wanted to verify if there aren’t any negative site-effects when hooked up a shared power supply. I also read a post that there will be negative impact on your effects chain when no seperate power supply is used for the Memory Boy.

In intentionally run my Memory Boy off a G-bus 8 supplying only 9.0 Volts instead of the 9.6 Volts that the Memory Boy power adaptor supplys.  I find I can get longer delay times (at the expense of fidelity) with the lower voltage.

The G-bus 8 supplies 1700 mA, which is plenty for my system.

Flick (EHX Staff) - 15 March 2010 03:11 PM

InvaderCC - 13 March 2010 02:01 AM

My power supply went dead after 37 days after date of purchase so i can not take it back…Which is the correct power supply number?I can not find one list for 45ma 9volt center negative…

This one:

http://accessories.musiciansfriend.com/product/ElectroHarmonix-US96DC200BI-9VDC-Guitar-Effects-Power-Supply?sku=150487

Or you could use a 1 Spot.

just checking ... for Europe it must be this one?

http://www.thomann.de/gb/electro_harmonix_eu96_dc200_bi_netzteil.htm

rocker_71 - 23 March 2010 04:25 PM

Flick (EHX Staff) - 15 March 2010 03:11 PM

InvaderCC - 13 March 2010 02:01 AM

My power supply went dead after 37 days after date of purchase so i can not take it back…Which is the correct power supply number?I can not find one list for 45ma 9volt center negative…

This one:

http://accessories.musiciansfriend.com/product/ElectroHarmonix-US96DC200BI-9VDC-Guitar-Effects-Power-Supply?sku=150487

Or you could use a 1 Spot.

just checking ... for Europe it must be this one?

http://www.thomann.de/gb/electro_harmonix_eu96_dc200_bi_netzteil.htm

That’s the correct adapter.