Small Stone Version 4 Wiring help
Post Reply
 
Newbie
Rank
Total Posts:  5
Joined  2010-02-25
Posted: 25 February 2010 10:11 AM

Hello

I recently bought a Small Stone version 4, but accedently ripped out all the wires, and can’t remember where they went on the PCB? Can someone post a pickture of the wires or explain where they go. I would also like to know if the Small stone version 4 is center positive or center negative?

I really hope you can help me

Quote
Administrator
Avatar
RankRankRankRank
Total Posts:  1287
Joined  2008-10-30
Posted: 25 February 2010 10:26 AM | Link to this reply (#1)

How do you accidentally rip out all the wires?

Ron Neely II
The EH Man, All-Knowing Guru of Electro-Harmonix
Electro-Harmonix info: http://electroharmonix.vintageusaguitars.com

EHX Customer service: http://newsensor.com/CutomerServices.aspx
Questions about power supplies w/ EHX products?: http://www.ehx.com/forums/viewthread/2957/
EHX power supply info and requirements: https://spreadsheets.google.com/ccc?key=0Ak9R7oW8W8MidHhCOHdKSkFTdGowdklDd2sza2VXMFE&hl=en&authkey=CJXI1aEF

Quote
Newbie
Rank
Total Posts:  5
Joined  2010-02-25
Posted: 25 February 2010 11:09 AM | Link to this reply (#2)
The EH Man - 25 February 2010 10:26 AM

How do you accidentally rip out all the wires?

i was drilling a hole to fit a dc plug so i could use my normal power suply for the pedal, when the dril got stuck swinging the pedal around ripping all the wires off - It hurt like hell as I was holding the pedal in my hand. Stupid? Yes! and i’ve learned not to do that again.

Quote
Newbie
Rank
Total Posts:  5
Joined  2010-02-25
Posted: 27 February 2010 01:23 PM | Link to this reply (#3)

no help?

Quote
Newbie
Rank
Total Posts:  3
Joined  2010-03-06
Posted: 06 March 2010 03:24 PM | Link to this reply (#4)

I was just going to post the exact same request. I, too, tried to modify my beloved Small Stone so I could use a normal adapter, but at the time my experience and skill was lacking and the power wires are now disconnected and I don’t know where to put them.

SO, if anyone has a Small Stone, could you please take a picture of the circuitboard and post it so that we can resurrect ours? It would be greatly appreciated.

By the way, something that I find works great with the Small Stone is to use a rechargeable Energizer 9V-style battery. They are only 7.2 volts full charge, but the lower voltage changes the tone. No mess, just swap out a battery. I really miss the old Stone.

Quote
Newbie
Rank
Total Posts:  5
Joined  2010-02-25
Posted: 06 March 2010 04:12 PM | Link to this reply (#5)
Vince - 06 March 2010 03:24 PM

I was just going to post the exact same request. I, too, tried to modify my beloved Small Stone so I could use a normal adapter, but at the time my experience and skill was lacking and the power wires are now disconnected and I don’t know where to put them.

SO, if anyone has a Small Stone, could you please take a picture of the circuitboard and post it so that we can resurrect ours? It would be greatly appreciated.

By the way, something that I find works great with the Small Stone is to use a rechargeable Energizer 9V-style battery. They are only 7.2 volts full charge, but the lower voltage changes the tone. No mess, just swap out a battery. I really miss the old Stone.

I Figured it out on my own - I’ll make a pickture later in the week as i don’t have the time right now

Quote
Newbie
Rank
Total Posts:  3
Joined  2010-03-06
Posted: 14 March 2010 12:34 PM | Link to this reply (#6)

Have you taken a picture yet?

Quote
Newbie
Rank
Total Posts:  5
Joined  2010-02-25
Posted: 15 March 2010 12:45 AM | Link to this reply (#7)
Vince - 14 March 2010 12:34 PM

Have you taken a picture yet?

wiring.jpg

Quote
Newbie
Rank
Total Posts:  3
Joined  2010-03-06
Posted: 16 March 2010 06:19 AM | Link to this reply (#8)

Thank you.

Quote
 
Post Reply
 
 
RSS 2.0 Atom Feed
Electro-Harmonix | www.ehx.com | Blog | Forums | Merch
YouTube.com/ehx | MySpace.com/ehx | Facebook.com/ehx | Twitter.com/ehx