So my 2880 will not record or play back from either the deck or from the foot pedal. the reverse and octave dont light up either. i can pass sound to my amp and some lights go on but not its main functions. I did run it USB into my computer a little while back and pull tracks off it but that wouldn’t effect it…would it?

-ryan

Hi
I have the same 2880 response but it is because my card reader has a broken pin.
Take out the card and see if one of the pins is bent.
crockmister

i took the card out and the problem continues…do they have a hepline?

I have the same problem! I’ve tryed with a new Flash card (4 gb) but it still doesn’t work. “New loop”, “record” and “play” bottons doesn’t react to pressure. Is there a solution? Thanks

ok,,,, shit happened again… new loop didnt work… this time I tried clicking the quick format option and it took about 2.7 seconds to fix the card. Quick format…. then jam.
~Tim L

BAROKTHEGREAT - 19 June 2010 03:54 AM

I have the same problem! I’ve tryed with a new Flash card (4 gb) but it still doesn’t work. “New loop”, “record” and “play” bottons doesn’t react to pressure. Is there a solution? Thanks

you know the max size it can read is 2GB, right?

Thanks! It works now!!!