EHX Forums

Effectology episode #23 “The Ravish Sitar”

2011-08-30T09:24:13Z

Effectology episode #23 “The Ravish Sitar” By Bill Ruppert

http://www.youtube.com/watch?v=WPYf0fYfbu0

Does the HOG cut out like the MICROSYNTH?

2012-02-08T11:33:09Z

I owned a Microsynth XO for a little while, but ended up selling it on Craigslist because it would cut out on longer sustains. I put a compressor pedal in front of it, which helped a lot, but hated having to use extra pedals to make it work correctly.

A few questions ...

+ Does the Hog have this same issue, or does it work well as a stand alone pedal?
+ Can you do the octave sweeps on the Hog like the Microsynth (high to low / low to high)?
+ Will the HOG eventually get the smaller XO footprint too, or is it destined to be a huge ass pedal forever?

I love what I have heard for the Hog, but the finicky-ness of the Microsynth has scared me with these type of pedals.

Creating a harp sound from guitar

2012-02-08T09:31:28Z

i use only EHX pedals i’m trying to create a clear harp sound for a session. any help?
also id love a dedicated pedal that could do this

thanks

james

Graphic Fuzz

2012-02-08T07:18:23Z

I am currently repairing a EH Graphic Fuzz pedal, (vintage) with no output. I am struggling to locate the schematic for this unit. Can you help please.
I am new to the forum.

Micro Pog - octave up or down only?

2012-01-20T12:29:53Z

Can’t find the answer to this question: can you set the Micro Pog to 100% octave down or up with 0% dry signal?

Anybody tried singing thru it? Might get into Brian Johnson’s range…

LPB-2UBE problem

2012-01-06T03:51:49Z

I’ve had the LPB-2ube pedal for about 3 years now and have been using it as a two (independent) channel tube preamp. i replaced the stock tubes with the tube store’s preferred series 7025 tubes and it’s sounded great until very recently - i noticed that one of the channels has started emitting a constant buzz and that there is a lot of noise when i turn the volume control for that channel.

i’m wondering if this could this be a sign of a potentiometer gond bad and/or is there something i can try to do to remedy this problem?

FWIW: the other channel sounds fine.

thanx,

_jc

MicroSynth mA use?

2012-02-07T16:01:10Z

What is the real mA use of the xo Bass and regular xo MicroSynth? I know it’s under 200mA. Want to make sure it will work with my multi-pedal regulated power supply. Thanks for help.

Post your Pedalboard

2008-10-31T12:18:06Z

I figure we should go ahead and start a thread devoted to our pedalboards, for people to come and see, ask questions, and learn some stuff. Just think it would work better than having all the info scattered across a bunch of threads.

I’ll kick it off with my bass board. This is actually the least EHX I’ve ever had on it! I intend to solve that quite soon.
It is a little messy since I had been having some power issues and had to mess with all my daisy chains.

Broken: EHX Bass Micro Synth

2012-02-07T12:41:55Z

Dear Sir,

I Bought a EHX Bass Micro Synth in 2009. It is now broken, I can still plug in and hear the output in “Bypass mode” But when I switch the effect on The LED Lights up but I don’t hear anything. I have taken very good care of the pedal.
I am really suprised that such a expensive pedal broke in a short time and I hope that it can be fixed??

Greets,
Mano

Memory Boy only works as last pedal in the chain - Help!

2012-02-06T15:43:38Z

So, my Memory Boy only works when placed as the last pedal before the amplifier in the chain. If there are any other pedals after it then there is no signal at all.

Does anyone have any ideas why this could be, and how I can fix it at all?

Thanks.